Welcome: Sino Special Metal Co., Ltd.
English ∷  Spain
sales@ssmsteel.com 86-19527792928

Products

  • Threaded Flange

    A threaded flange, also called a "screwed flange," is used to connect a flange to a pipe with a screw thread. On the end of the pipe, a male thread is cut, and on the inside of the flange, a female thread is cut. The male-threaded pipe is then screwed into the female-threaded flange.

  • Lapped Joint Flange

    The two parts of a lap joint flange (LJF) are a stub end and a lap joint ring flange, which is also called a "lap joint flange." The stub end is not a part of a lap joint flange, to be precise. But a lap joint flange is always used with a stub end. Together, these two parts are often called a "lap joint flange."

  • Slip On Flange

    Slip-on flanges, which are also called "hubbed flanges," have a very low hub. Most of the time, one or two fillet welds (one outside the flange and one inside the flange) are used to connect this type of flange to a pipe. However, it is possible to use only one fillet weld. Slip-on flanges come in a wide range of sizes

  • Hastelloy Pipe Fittings

    Size: Hastelloy pipe fittings are available in various sizes, ranging from 1/8" to 48" in diameter, depending on the type of fitting. Pressure rating: The pressure rating of Hastelloy pipe fittings may vary depending on the alloy used and the application requirements. Generally, Hastelloy fittings can withstand high

  • Monel Pipe Fittings

    Material: Monel 400, Monel K500, Monel R-405 Standards: ASTM B366, ASME SB366, MSS SP-43, DIN 86019, EN 10253-2 Sizes: 1/2" to 48" (DN15 to DN1200) Types: Elbow, Tee, Reducer, Cross, Cap, Stub End, Nipple, Union, Coupling, etc.

  • Nipples Pipe Fittings

    Material: Nipples can be made from a variety of materials, including stainless steel, carbon steel, brass. Size: Nipples come in a range of sizes, typically measured in inches or millimeters, and the specifications will vary depending on the size. Thread type: Nipples can have a variety of thread types, including

  • Inconel Pipes Fittings

    Size Range: 1/8" - 48" (DN6 - DN1200) Wall Thickness: Sch 10S, Sch 40S, Sch 80S, Sch 160, Sch XXS Types: Elbows, Tees, Reducers, Caps, Stub Ends, Couplings, Unions, Crosses, etc. Shapes: Butt Weld, Socket Weld, Threaded Standards: ASME B16.9, ASME B16.11, MSS SP-43, MSS SP-95, BS3799, DIN 2605, EN 10253-2

  • Incoloy Pipes Fittings

    Material: Incoloy pipe fittings are typically made from one of the following grades of Incoloy: 800, 825, 800H/HT, 901, or 925. Standard: Incoloy pipe fittings are available in a variety of standard specifications, including ASTM B366, ASME SB366, and DIN 17744. Size: Incoloy pipe fittings are available in a wide

  • Stainless Steel Pipes Fittings

    Size range: Stainless steel pipe fittings are available in a range of sizes from 1/8" to 48" in diameter. Type: There are various types of stainless steel pipe fittings, including elbows, tees, reducers, couplings, flanges, and valves. Material grade: Stainless steel pipe fittings are made from different grades o

  • Carbon Steel Pipe Fittings

    Carbon steel pipe fittings are available in a wide range of types and shapes to meet various industrial needs

« 1 ... 678910 ... 12 »